| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Recommended Arc Flash Suit https://brainfiller.com/arcflashforum/viewtopic.php?f=33&t=5982 |
Page 1 of 1 |
| Author: | Jolabebe67 [ Fri Feb 28, 2025 6:41 pm ] |
| Post subject: | Recommended Arc Flash Suit |
I need a 40 cal/cm² arc flash suit for live work on 13.8 kV switchgear in an indoor substation. Focus on comfort and full-body protection is a plus. What brand or specific suits do you recommmend for this level of protection? |
|
| Author: | Jim Phillips (brainfiller) [ Mon Mar 03, 2025 3:47 pm ] |
| Post subject: | Re: Recommended Arc Flash Suit |
I can't recommend but do a web search, due diligence etc. Be sure it complies with either ASTM or IEC standards. See where it is made, some counterfeit PPE is out there. |
|
| Author: | AustinPena [ Tue Oct 14, 2025 8:52 pm ] |
| Post subject: | Re: Recommended Arc Flash Suit |
Go with a well-known NFPA-70E / CAT-4 (≥40 cal/cm²) kit from a major vendor that advertises lightweight / breathable fabrics and a good hood option (lift-front or PrismShield) for comfort and full-body protection. Strong candidates are below with why I’d pick them. Try before you buy if possible — fit/mobility matters a lot for live switchgear work; many vendors/distributors will demo or exchange. |
|
| Author: | michaelfriendly [ Mon Jun 08, 2026 1:20 am ] |
| Post subject: | Re: Recommended Arc Flash Suit |
For comfort and full-body protection, choose a well-known NFPA-70E/CAT-4 (≥40 cal/cm²) kit from a major vendor that promotes lightweight/breathable fabrics and a good hood option (lift-front or PrismShield). Strong candidates are listed below along with my reasons for choosing them. If at all feasible, try before you buy. Fit and mobility are crucial for real switchgear work; many distributors and vendors will swap or demo. ________________ RBTV77 |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|